[serene911]

Hey Bill, I did those awhile back. I believe the product was Waterlox. My friend had
brushed it on and had alot of brushmarks. I sanded that down and then sprayed them.
Decades ago I used to do finish work on multi million $ yachts, so I've sprayed just about
everything you can think of. Usually I spray a coat or two,let that tack up, then spray
another coat or two,Being careful not to get runs, etc. Sand that down to a smooth finish,
then spray again. Tack rag that and go thru the same process.Probably 9 or 10 coats by
the time I'm done. The key to really good finish work is of course the prep. Along with that
understanding proper thinning of the product you're spraying and air and volume settings
on your spray gun. For the most part I've just used an old school cup gun or touch up gun.
Is the PPG clear you used a one part or catalyzed .