|
"While they are in there" I would urge you to get turbo tie rods, at the very least. My front torsion bars had started rubbing so they really needed to be replaced. A bump steer kit is not expensive and helps a lot if you are going to have it lowered to European ride height. And of course the ball joints can be checked, and only replaced if needed, but likely need to be replaced just due to wear.
__________________
Glen
49 Year member of the Porsche Club of America
1985 911 Carrera; 2017 Macan
1986 El Camino with Fuel Injected 350 Crate Engine
My Motto: I will never be too old to have a happy childhood!
|