Quote:
Originally Posted by Cobalt
They should be adhered using 3M double stick panel tape. 2 strips about 1/4" by the length of it. I use a plastic scraper and heat to remove them. The last set I installed came with the double stick tape already applied to the unit.
I see you pulled the rockers off.
|
Same, new set of rubber trim had the double sided tape already attached so it was a simple installation once the door seal was out of the way.
Good eye on the rockers, that project is nearly done although what a rabbit hole that was with all the cleaning that came with it. 
__________________
CURRENT:
2011 Boxster Spyder, Sport Buckets, MT, Full Leather, PSE, Basalt Black/Black
1990 964 C2, MT, Marine Blue, Silk Grey/Marine Blue
2024 Macan White, Beige / 2010 Cayenne White, Black
PAST: 69 911 Targa, 87 928 MT Marine Blue, 90 928 GT Marine Blue, 90 911 Targa Stone Grey
|