|
Muffler mod question
I have a 02 Boxster S that I would like to increase the muffler sound on. I looked at fister but for the cost, feel like I’m adding sound but going backwards on performance. I thought maybe I could have my son do the fister mod but going to air gas yesterday, the gas alone is over 600. Add in wire and I think argon to pump inside the muffler, I’m suddenly at fister costs.
I also took to muffler shop and they didn’t want to weld off the car due to alignment and didn’t want to do on the car due to space issues.
Now this might sound stupid but figured I would ask. I have a spare stock S muffler. It’s a bit rough but I’ve been polishing and it’s starting to look pretty good. At the two muffler input pipes, can I just drill a hole on each side (facing down). The fister just bypasses the muffler with a pipe from the input to the exhaust tips.
I’ve done cheaper mufflers before and the drone was annoying. I’ve looked at more expensive 2 can and they seem to drone too (less).
Honestly, I don’t want to buy a muffler that is 1/8 the cost of the car if I don’t need to.
Thanks.
|