[Jim Smolka]

Starting to use the ProTool App.

The cruise control was not working, so thought, let's see what codes are there.

Most of the codes seemed to be related to when the battery was changed.
Also, the E93 was in "Transport Mode."

Reset the codes and turned off Transport Mode."
Now the cruise control works.
Hope it stays working.

Update 1:
The next day, the Cruise does not work...
Have to read the codes and see what's going on with the system.

Update 2:
Using ProTools, the following two errors appear:
DSC [DSC_87] 5DCC: Hydraulic unit: pressure sensor, plausibility
DSC [DSC_87] 5DBC: Hydraulic unit: pressure sensor, plausibility

The DSC / ABS appears to have a sensor issue.
There are places that can rebuild/service the DCS/ABS, but they cannot fix the sensor issue.
Will attempt to bleed the brakes and would like to activate the ABS unit.
However, ProTool cannot activate the DCS/ABS unit.
INPA can activate the DCS/ABS and the software has a brake bleed procedure.
Looks like more software and a cable (K DCAN) is needed.
Hopeful, that the sensor problem can be fixed with a brake bleed (doubtful).

New DCS/ABS units are ~$3,100 USD. Bummer.
Rebuild kits are $1,400, but no idea if it the rebuild kit will fix the problem.
Used units are available, but no idea if they really work until they are installed.
Likely, that a new or used DCS will have to be programmed to BMW.
More to follow.