Long story short. Car has a cam deviation, in an attempt to fix this I replaced the camrails, and solenoids and retimed the cams with the porsche tool.
1999 996-IMSHas been replaced
Before I did this I did not have a durametric, I was told by a shop about the cam deviation.
Car still idles super rough, runs fine besides the CEL
I have been chasing this issue for about 6 months on and off. Since the rails and solenoids I have replaced the AOS Tubing, all the vacuum hoses, the breather valve, vaccuum check valve, the cam position sensors, and most recently the air idle control valve.
I dont have a trusted shop nearby as Im newer to Knoxville TN. I have taken to a couple places that just want to complete a full rebuild at 10k+. They have no good reason to tell me whay they recommed this except for the shops peace of mind....
Not sure where to go here? I'm wondering if I really screwed the cam timing on bank 2?
I appreciate any help.