|
Do not use what was there!!! Shims come in .25mm .50mm .75mm 1mm
Make your own measurements
.033” to .040” is the correct deck height for a street engine
Measure them all 5 times
One shim per cyl with a very very very thin film of curl T 2.
That 3 cyl head bank must be built and tourqued in 60-70 min? Stomski wrist pin tool helps much
So practice alot!!!!! Set wrist pin clips only on the real assy… So the base shim is going to seal against oil leaks
All cyls must be the same height per side
|