So here is the door deconstruction
There is a T20 holding the door handle on, remove
Once the handle is off you can see a small plastic circle, just press on the bottom and it will come out to reveal a T30 nut
Next move on the door grab handle pry from below to get it off
It reveals two more T30's
Then move on to edge of the door and pry out the plastic trim to reveal another bolt
Then move on to the plastic covering the mirror area, pry up from the bottom while squeezing from the sides. There is a slotted piece of plastic at the top so the trim must go up from the bottom, don't pry on top. Remove the T30 pictured.
Now the hard part, pulling from the corners at the bottom of the door to get the push pins out - This took all the strength I had!! I'm sure it hasn't come off in 18 years.
Once off, it's two electrical connectors and the door handle cable to undo. The woofer stays in the door and the mid is on the panel.
Here is the new Mid in the door panel
