[bugstrider]

Originally Posted by URY914

It's been a little while since I updated my column replacement project. Here is how I finished off the column bases.

The columns are 4 x 6 so I took a 2 x 6 and routed out the back side so they fit the over the connector plate and bolt heads. First one took quite awhile to fit tight. The other three went much faster. I used Liquid Nails/screws/caulk/paint. I held them off the ground about an 1/8".

Oooooooohh, that looks nice. We have four posts in the front that would improve the esthetics dramatically.

[emoji482]


Sent from my iPhone using Tapatalk