|
A better question is, how long ago did they go bad. Wires just don't go bad. When was the last time they worked. I think you must have done something during your rewire. I would remove the switch, and find out which is the hot leg like Milt said. Then jsut jump the wire to see if the light goes on. If so, then hot up the traveler and see if anything happens at the other end. Depending how it is wired, no need to get fancy just a simple test light will almost do. Its a process of elimination. 3 ways wiring isn't too bad to trace once you have an understanding where the power is coming from.
|