|
Just measure ohms on the female pin you asked about to the wire going to the sender.
You are measuring partial gauge power with ignition on.
If you want to check continuity to the gauge, disconnect the wire at the gauge, and check from that pin to the female spade.
Not sure what you are trying to yes/find out?
__________________
Dennis
Euro 1978 SC Targa, SSI's, Dansk 2/1, PMO ITBs, Electric A/C
Need a New Wiring Harness? PM or e-mail me. Search for "harnesses" in the classifieds.
Last edited by timmy2; 05-26-2024 at 09:50 AM..
|