|
PCA Member since 1988
Join Date: Feb 2018
Location: SW Washington State
Posts: 4,646
|
Machine shops have special tools/jigs for checking and rebuilding rods. No easy way to do it at home. Check that the side clearance is the same all the way around. Tech spec book says 0.20 - 0.35mm or .008"-.014".
__________________
1973.5 911T with RoW 1980 SC CIS stroked to 3.2, 10:1 Mahle Sport p/c's, TBC exhaust ports, M1 cams, SSI's. RSR bushings & adj spring plates, Koni Sports, 21/26mm T-bars, stock swaybars, 16x7 Fuchs w Michelin Pilot Sport A/S 3+, 205/55-16 at all 4 corners.
Cars are for driving. If you want art, get something you can hang on the wall!
|