[gdp_samson]

Hi,

the right side of the car (left = driver) is sitting 0.5 cm (1/5th of an inch) lower than the left side when measuring from ground to wheel arch...and I really feel that, the car pulls heavily to the right when I don't touch the steering wheel.

(and strangely, it makes a loud low sound when steering to the left or straight, and that sound dissappears when turning to the right - where the car 'wants' to go if I would not control the steering wheel).

How does the front suspension tuning work ? turning the adjustment screw 'clockwise' will lower that side ? or the opposite ? I don't understand how it works...

And when does one know that the range of the adjustment screw is not enough, and that you have to change a spline on the torsion bar ? (30 splines = 12°)

Strangely, the adjustment screw left AND right is at the exact same position when measuring the position of the screw, but still the car has not the same height left and right when comparing the wheel arches...

Thank you for your advice, or a link to an explaining youtube video or whatever...