Quote:
Originally Posted by masraum
While we're on the subject, if we're putting down 2 or 3 layers of water based satin poly, what would you recommend doing in between coats. I'm concerned that trying to do any screening or sanding could cut through previous coats and stain which would be a disaster.
|
Unnecessary and undesirable to abrade between final coats. Dust free please! Make sure the windows and doors are shut tight. Put no entry blue tape at eye level across the doors. I do two coats only of final coating. 2 is plenty, any more can result in a finish that's too soft and dents easily.