|
Registered
Join Date: Dec 2002
Location: Dahlonega , Georgia
Posts: 15,042
|
Quote:
Originally Posted by JackDidley
While you have it on the lift, look for 3 plastic plugs in the inner rocker. Pop them out and spray a coating of cavity wax. It will save your truck from a rust problem. If you dont it will start to rust there. Once it starts it travels fast.
|
Forgot to mention last week I had her on the lift and popped the six plugs out . Inspecting the interior of the rockers with a flashlight they looked brand new inside . That reinforces the truck lived in Arizona . I sprayed Fluid Film inside and distributed the best I could with the nozzle straw . Saw FF starting to come out the bottom drains so should be good to go . Popped the plastic plugs back in it all looks stock again . Thanks for the tip .
__________________
2002 Boxster S . Arctic silver + black top/int. Jake Raby 3.6 SS engine " the beast ". GT3 front bumper, GT3 side skirts and GT3 TEK rear diffuser. 1999 996 C4 coupe black/grey with FSI 3.8 engine . Rear diffuser , front spoiler lip with ducktail spoiler .
|