[sugarwood]

I switched out the 3 year old switch for a Beck/Arnley 201-1087 Stop Light Switch.
The brake light is now working. Was not air bubble or bleed issue.
So, the cheapo switches fail fast.
Can't remove front switch since its blocked by brake line.

What a nightmare of a simple repair.
Remove carpet, remove shield,
detach cross brace (annoying bolt access at bottom)
detach 2 hoses, detach electrical plug,

22mm switch is so blocked by stuff.
1/4 turn at a time.
Back on fire

Getting air hose re-attached was also a hassle b/c it's not clear if the underside is seated.
Electrical plug also gets in the way.
I also started to attach the cross brace to the wrong screw hole (for back shield)