|
Any 964 ABS/AWD Experts Here?
I have an ongoing 'fault' that occurs after a couple of minutes of driving, red brake light, red AWD light, and the dreaded bell.
I have some aftermarket software (Bergvill) that properly diagnosed my failed wheel speed sensor, and a faulty accelerometer, but I still have a persistent fault after several minutes of driving.
My Bergvill software does not seem to communicate with the ECU when the car is running, and when the car is OFF there is no fault stores.
The ABS pump seems to work properly when the key is ON, but after sitting it does seem to take a long time to shut off.
I have bled the brakes and added fresh fluid, I have not bled the AWD. It seems a bit tedious without a Hammer, but I think I should do it soon.
Anyone know enough about the 'ABS/AWD monitor procedure' to point me in the right direction? (I tried the 964/993 forum with zero success/suggestions.)
__________________
"A machine you build yourself is a vote for a different way of life. There are things you have to earn with your hands."
Last edited by 1990C4S; 07-18-2024 at 10:06 AM..
|