Labor Day 2024, continued.
While I had the LBDC out in the sun, I took some pics to illustrate the change that's taking place.
Before
After
With that picture in mind, it was time to tackle the RF flare.
More measuring.
More masking tape.
More measuring.
More thinking.
More measuring.
Set one screw.
More measuring.
Made a couple marks.
Moved some tape.
More measuring.
One more screw.
More measuring.
I'm reasonably certain you're getting the picture, so I'll cut to the next pic.
And from a protestor's perspective.
Wash. Rinse. Repeat for the RR and you get this.
A little better angle.
Two days of being hunched over has my back aching and my knees hurting. I took a position on the retaining wall to stare at the car and field questions from Kelly. After a couple minutes of sitting, this happened and concluded this weekend's work.
I'm keen to hear any pro-tips or caveats Pelican has to share before I start cutting this thing. Don't be shy, I'd rather have too much info than not enough.
See you all in a couple days.