[SWS911]

Are you gonna use 2.4E pistons or 2.2E pistons? 2.4E pistons on a 2.4/2.7 crank will only be an 8.0/1 compression ratio where as 2.2E pistons on a 2.4/2.7 crank will have an appx 9.5/1. E cams will work, but the T cams will give you a broader torque curve. I wanna run pump gas and keepin' the compression ratio at 8.5 is a good solution for me. My 71 case has the squirters, I thought all 71MY cases had 'em. My bad. Also I think the Zeniths will work better with the smaller ports of the T heads. If you decide to open up the intake ports and E cams, I would go with the Webers since there are a lot more jets and venturis to choose from to accommodate the need for a richer mixture at higher RPM with the bigger ports.