Quote:
Originally Posted by mike sampsel
Like the knowledge, it might be a challenge to get everthing to bare metal in the recess of the rear fender by the doors. As such, I'm thinking maybe a rust attacking-inhibiting paint might be okay. Or are these just snake oil? Hum, I guess the paint I ordered is fortified with epoxies, so it might suit me well.
Thanks for sharing your wisdom, knowledge is always appreciated.
|
Just did this last year on a rotisserie and it was still a pain. Try a knotted wire wheel to remove chip guard( be careful they are dangerous don’t catch an edge) or a little pneumatic chisel, sandblasting would take forever. Get it down to metal apply ppg metal cleaner then the conditioner or similiar then epoxy let it flash then new chipgaurd.