|
Registered
Join Date: Jul 2013
Location: Brisbane, Australia.
Posts: 2,629
|
Is there any value in using this design for a turbo engine build?
My 3.0sc engine is to be rebuilt using 964 crank and rods, and aiming for around 8.5;1....
Not sure if James can have a set custom made with correct pin heights etc?
__________________
Always learning.
www.aircooledporsches.com.au
See me bumble my way through my first EFI and TURBO conversion!
https://youtu.be/bpPWLH1hhgo?si=GufVhpk_80N4K4RP
|