Quote:
Originally Posted by mikedsilva
When rotating to the face of the pinion, it is giving me a reading of 0.2mm. So I believe that means, that with the 63.3 + 0.20 = 63.5mm is where my pinion setting is without a shim.
Now, the N number on my pinion is 0.22. So that means the desired deviation is 63.3+0.22 = 63.52.
Not sure I am using this correctly...
|
ok, i'm a bit of a goose. I was reading the gauge in reverse.
Instead of 63.3 + 0.22, I should have read it as 63.3-0.22 = 63.08.
And because I want it to be 63.52, that means I need a shim of approx 0.44.
At this stage I only have the 0.2mm shim.
I used some gear marking compound at both settings. Not entirely sure how to read them but I think it's moving in the right direction after I added the 0.2 shim.
First pics are with no shims installed.
And these next pics are with the 0.2mm shim installed.
