Quote:
Originally Posted by A930Rocket
^^^ After some reading online, I don’t think I can ream it from .468 to .5 Not in one go any way. Maybe a tapered reamer?
|
No, do not do that. Buy a good drill bit, the one that produced smoked is done.
Normally I would say that 0.468 is too small to ream, but's not a solid hole, it's threaded. Just buy a good bit, slow the rpm, lubricate and don't overload the bit.
https://www.amazon.com/HLOFIZI-Cobalt-Drill-Titanium-Stainless/dp/B0D3DVDXHN/ref=sxin_15_pa_sp_search_thematic_sspa?cv_ct_cx=1% 2F2%22%2Bdrill%2Bbit&sbo=9ZOMT9Jm0JH%2Ft%2BWi68iDSA%3D%3D&sr=1-1-ac07dfd7-5f37-4797-bcf7-0f4905c82761-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM
__________________
"A machine you build yourself is a vote for a different way of life. There are things you have to earn with your hands."
Last edited by 1990C4S; 12-02-2024 at 06:33 AM..
|