[A930Rocket]

I’m sure there’s somebody local, but I enjoy doing this.

While it may not look pretty, will it work and is it safe? I deburred the edge.

I might be able to fab up something else, but using the 2 x 8 with a snug hole, allows me to rotate it. I also drilled a hole, that I put a pin into, to stabilize the work. I’ll see what I have to actually clamp the hub down as well. The reaming and counter sinking processes worked great.



908/930… are you saying grind the flat part of the cutter so that the cutting edge is smaller? I’ve got a bench grinder that could do it. But for 20 holes, I’m not sure I want to booger up a $60 bit.