Quote:
Originally Posted by steven c
Thanks Roy, this is helpful! So with this I have the control box out out and on the passenger seat and I applied power from the connector to the motor and got it to move back and forward. This is the first time I have seen the motor move. But I have no power coming out of the 2 brown wires that connect to the 2 yellow wires you mentioned, which I'm assuming means that no trigger power to the engine blower relay which will keep the blower from running. I'm going to have to find a wiring diagram of the control box, because if it takes the 2 temp sensors and the circuit board working with them to power the relay trigger it will not work as I want it to.
Thanks again,
|
The unit doesn't supply power, it provides grounds. Read the wiring diagram.