Quote:
Originally Posted by JSV798
On my car there are two yellow wires (under the carpet?) which need to be connected to the corresponding wires on the control box. Did you disconnect these to get the box out? Order of connection doesn't seem to matter. I'm speaking from memory here; I'll check tomorrow as it's 8.23 pm here and cold and dark! Ignition needs to be on, engine doesn't need to be running. Also need to have the other connections in place. I wouldn't worry about the sensors at this stage. I think the idea with the sensors is that you dial in a temperature and the system will attempt to maintain that temperature by opening/closing the gates.
Roy
|
Roy,
Yes, I disconnected the 2 yellow wires and they are negative and the continuity is broken by the limit switch on the electric motor when the lever is at fully off. I have everything connected and in the car except for the 2 temp sensors connections and it is working. It didn't work when I got the car and I have no idea what I did to make it start working other than disconnecting the 2 broken temp sensors? I'm happy with it as it is, if it will turn the fan off. Once I get the motor back in the car we will see.
Thanks everyone for the help!