|
The car is in a heated garage, 65 degrees. Ran it for maybe 30 sec a couple of times. Definitely 1 or 2 cyl are not firing. Also I could tell cranking, the starter was struggling a bit with a fully charged battery so I know the timing is too far advanced but will adjust that once it is running on all 6. Pulled the cap and all looks good in there. Measured resistance end to end of ignition wire for number 6, got 4k ohms, coil wire was 1 k which sounds right to me, about 1K per foot. Will do as many as I can get to. I’m probably going to order new plugs and wires if I don’t find the cause today.
|