[Otter74]

I've chipped away at wind noise on my top for a while (new correct front seal, adjustments, etc.), but while it's better, it's still noisy. My issue is that with the front locating pins in their holes, the top won't go back far enough on the rear locating pins to sit all the way against the Targa bar and the front sits too high. If I remove the front locating pins, it goes all the way back and drops down no problem. This shouldn't be happening, but it is. I've talked to Dan Pechtel about it. Most likely what I'll end up doing is ovalizing the locating holes in the front of the top frame so that I can move the pins forward a few mm, which is all it needs. That and some more window adjustment