|
2'x2' is still a fairly large part, do a couple really small ones first. I assume you are doing a wet layup and not prepreg material? You don't really need bag fittings, the sealant tape more like soft acrylic cord is excellent at sealing anything, for larger parts using prepreg I would just run 3 or 4 x 1/4" dia pvc tubes in the bag wrap the end with cloth and seal them to the bag, use one for vac gauge and T the others to the vac pump. A old ac compressor from a freezer is likely enough to get you going if you have one available. You need some sort of catch can before the vac pump.
No recommendation on equipment kit.
__________________
87 930,
Last edited by 908/930; 03-09-2025 at 07:54 PM..
|