|
Thanks for all the response. Head nuts had lost 2-5 foot pounds. Henry, those were the cylinders I had at the time. I have a set of 3.2 KS which I will send out for Nikasiling but have run these cylinders for 4-5 years with no issues. Elgin cam 306/288 100 centerline which is not as hot as the 314/296. Did not calculate dynamic compression. Again, is same motor that I have been running for a while with one exception. Went from 3.2 heads to a set of 78 SC heads reconfigured by Xtreme heads. Bill said an additional 30 HP and I said I don't know if I want an additional 30 as I think in its previous form was probably making 325-330. Maybe the CE cylinders can't handle it. A way to monitor detonation I probably need. I am 80 and ran out of projects 7-8 years ago and turned to this addiction and it has been expanding with much fun and related problems but I knew that would happen. Bob
|