|
Not that I know off. It’s all based on how far you want to take it. A nut and bolt restoration would take it down to bare metal. Take lots of pictures and save and label what you take out. I use little ziplock baggies, painters tape and a sharpie to save small parts like bolts. I also use bigger buckets or scrap boxes to separate the items based on location (engine compartment, frunk, interior, etc). I am doing body work, electrical, engine, suspension, and interior at the end. I’m no pro, but that’s what made sense to me after searching and experience with another restoration I did. For me, works best to divide big jobs into smaller jobs that I can check off a list.
Sent from my iPhone using Tapatalk
|