|
Registered
Join Date: Oct 2017
Location: houston, texas with Enzo SPCA # 8995
Posts: 486
|
I measured the cross-section several times using a pair of calipers. Using the calipers to measure the ID was difficult dammit, but the measurements I got correlated pretty well with what I got laying the O-ring on top of a flat metal measuring stick. I actually ordered O-rings on either side of what I believe to be correct ones, and hope that McMaster-Carr has a generous return policy! Thanks again. stebve
__________________
Steve Meltzer
'69 911E/bastard
|