|
Slightly Knowledgeable
Join Date: May 2021
Location: Western Washington
Posts: 70
|
At this point, 54 views but no replies. I've decided to bite the bullet and go ahead and buy the washer fluid level sensor. To get at the thing you have to remove the driver-side front wheel and take out a dozen or so fasteners to remove the inner wheel well liner. That's a bit of work, so I would prefer to have the part in hand rather than order it then and wait several days with the wheel off and the car up in the air.
__________________
2009 Porsche 911 C2S, 2002 Porsche C2S (traded)
|