|
Not sure, but but I would have the pipe go underground to condense air, have a downwards-sloping zig(and a drain spigot) near the floor, then go up over the ceiling down to another drain spigot near the floor.
About halfway down that pipe would feed to the outlets, which face upwards to trap liquid water in the pipes.
The first would get the majority of water collected and the second would be for any remaining.
There was a site that talked about using copper to disburse heat, and putting the output loop through a bucket of ice water to condense all water in the lines. Also, most of the noise was from the compressor intake.
__________________
Meanwhile other things are still happening.
|