|
In the Fires of Hell.....
Join Date: Oct 2007
Location: Phoenix, AZ
Posts: 3,779
|
I just did this on my '88 turbo. Cutting the ear is simple with a hacksaw and a hand file.
One thing I found is that the low side fitting is difficult to get started, and the retrofit with the existing hose (you need to cut your existing low side fitting off and replace it) was barely long enough to reach.
Other than that the kit is great, high quality, and has everything you need with good instructions.
Cheers, Keith
__________________
PCA Instructor: '88 951S - with LBE, Guru chips, 3Bar FPR, 1.3mm shimmed WG, 3120 lbs, 256 RWHP, 15 psig boost
|