|
Please clarify. Looking into the engine on the left side rear there is a mount for 3 plugs. These are the cylinder head temp, TDC, crank speed sensors. The side of the harness that has all 3 sensor leads going into one harness is the DME side. The lead pointing towards the middle of the engine are the sensor sides.
Metering the CHT sensor it shows open. I do have 2 pins in that plug. I metered between the 2 pins and each to ground. All readings show open. This would indicate the CHT sensor is bad correct?
Form research some say this can cause a no start situation. Fingers crossed.
Best
Foster
__________________
Foster
Monroe, Ga
1984 911 Carrera Targa
|