Quote:
Originally Posted by Lyle O
A while back I had a funky similar situation (though the non-start would come and go randomly). My relay, and sensors were good, so I found the connection between the speed sensor and wire harness seemed to be an issue ("jiggling" there would sometimes result in a "fix). I changed out the the connector there (that mates to the sensor) and the problem disappeared. Just another item to check...good luck.
|
I've done a full pinout test on the DME harness and everything seems to be sending a signal or has continuity. Once I put the DME back together, I'll try some jiggling and keep my fingers crossed!