View Single Post
A930Rocket A930Rocket is online now
Registered
 
A930Rocket's Avatar
 
Join Date: Oct 2003
Location: Mount Pleasant, South Carolina
Posts: 14,680
Update today 8/5/25 and it’s no surprise the blame rests on the shoulders of the CEO and designer Stockton Rush. What an ass.

https://www.foxnews.com/us/explosive-new-report-blames-oceangate-and-its-ceo-for-preventable-titan-sub-disaster

A damning new report on the Titan submersible disaster that killed five people has revealed that the tragedy was preventable, and the result of a flawed experimental design and ignored safety warnings — with particular culpability placed on OceanGate CEO Stockton Rush.

The 335-page report by the U.S. Coast Guard (USCG) is the first full government post-mortem on the tragedy to date and the first official document to clearly assign blame to OceanGate, the now-defunct operators of the ill-fated vessel, and Rush.

The report paints Rush as the architect of the submersible's failure who overruled engineers' warnings about the vessel's flawed design, which ultimately led to the vessel imploding near the Titanic wreck in the North Atlantic Ocean in 2023, resulting in the instantaneous death of all five occupants.

VIDEO SHOWS OCEANGATE CEO'S WIFE REACT AFTER SOUND NOW THOUGHT TO HAVE BEEN TITAN SUB IMPLOSION

Rush, who was piloting Titan when it imploded nearly 11,000 feet below the Atlantic Ocean, insisted on using a five-inch-thick carbon fiber hull despite failed model tests and industry opposition. The submersible's viewport was only rated for depths of 2,130 feet, far less than the 12,500 feet needed to reach the Titanic.

"This marine casualty and the loss of five lives was preventable," said Jason Neubauer, the USCG Titan Marine Board of Investigation (MBI) chair. "The two-year investigation has identified multiple contributing factors that led to this tragedy, providing valuable lessons learned to prevent a future occurrence."

Previous reports focused on the technical cause of the Titan's implosion but stopped short of assigning blame.

"Mr. Rush exerted full control over every facet of the company's operations and engineering decisions... His refusal to prioritize safety and his dominant leadership style created an environment where the Titan's eventual implosion became almost a certainty," the report found.

The board determined the primary contributing factors were OceanGate's inadequate design, certification, maintenance and inspection process for the Titan. Other factors included a toxic workplace culture at OceanGate, weak safety rules for deep-sea subs like Titan — especially those using new or experimental designs — and a broken system for protecting employees who tried to speak out.

Titan suffered a catastrophic implosion due to structural failure of its carbon fiber composite pressure hull and the carbon fiber hull showed signs of fatigue and delamination in testing before the fatal dive. While OceanGate engineers and advisors raised serious concerns about its safety margin, they were ignored or sidelined by Rush, per the report.

"Titan’s carbon fiber hull design and construction, in terms of winding, curing, gluing, thickness of hull and manufacturing standards, introduced flaws that weakened the overall structural integrity of the Titan hull," the report reads. "The carbon fiber pressure hull suffered a full material collapse due to buckling on its final dive."

Several red flags were raised in previous dives, but Rush continued operating Titan, dismissed internal warnings and concealed critical damage from crew and clients, the report found.

For instance, more than 150 loud hull-cracking noises were heard in a 2019 dive, indicating progressive degradation. A four-foot crack was later found in the original hull, which was de-rated after pressure testing — prompting OceanGate to build a new one. However, throughout the development of both hulls, four one-third scale models were tested and all of them imploded under pressure, reinforcing that the carbon fiber design was unstable.

Additionally, the forward dome of the Titan — a 3,500-pound pressure-bearing component — was designed to be secured with 18 bolts, but Rush only used four bolts, according to testimony from OceanGate’s director of engineering at the time.

During a 2021 Titanic dive, Titan’s four securing bolts sheared off while being hoisted aboard the Horizon Arctic, causing the forward dome to detach and fall onto the Launch and Recovery System platform in a catastrophic mechanical failure that narrowly avoided injuring the crew.

The report found OceanGate bypassed industry-standard certification, ignored its own Health, Safety, and Environmental (HSE) manual and fostered a culture that suppressed safety concerns.
Old 08-05-2025, 06:40 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #756 (permalink)