We were unable to combine the 10mm rack spacers with the bump steer kit when using 19mm raised KW spindles. I can't remember what the issue was now but I talked to Chuck at Elephant and he said to remove the rack spacers when using the bump steer kit.
Quote:
If using both, the potential for overcorrection exists. Normally the tie rod end kit alone has adequate range for full correction.
Only exception to that would be our bolt on kit with a big spindle rise, like 40mm+
Our racing kit can handle anything.
|
__________________
SWB 912 - G50 Carrera - 986 Boxster - 997.2 911 Turbo - 958.2 Cayenne - 9Y3 Cayenne GTS
SOLD: 958 Cayenne Turbo S - 997 Carrera 4S - 957 Cayenne Turbo
Workshop Coordinator at Ehrlich Motorwerks
instagram.com/patrickossenkop
ehrlichmotorwerks.com
Last edited by Mr. Merk; 08-06-2025 at 09:34 AM..
|