[TEKWS01]

Scooter311,,, If your going to rebuild your engine without a stand, I'd like to share my expereince with this... when you need to put the crank in, and assemble the case halves .You will need to turn the engine on its side.. this is where the problem is. the cylinder studs are sticking out. I found that a upside down milk crate was perfect.. the studs would slide through the hole (grating) and the cylinder base side of the case would sit flush and hold steady.. allowing crank,cam and other case half to be installed with ease. Oh ,and save that crate,, it worked great when I needed to place the transmission face down.. while changing broken intermidiate plate bearings and cracked end cover.