|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
Oil cooler is attached with four regular steel hex nuts (900.076.025.02) and B8x15 wave type spring washers (900.028.024.02).
The chain cases are attached to the case halves in the back (front of car) with three 8mm fibre insert locknuts (900.084.004.02 or Pelican J-084-004-02) bearing on 8.4 mm aluminum washers (900.031.014.30) and with two regular steel hex nuts (900.076.025.02) with B8x15 wave type spring washers in the front.
The chain case covers are secured with 6mm fibre insert locknuts (PN 900.910.012.02) bearing on 6.4 mm aluminum washers (900.031.011.30).
Last edited by Jim Sims; 04-05-2004 at 09:26 PM..
|