Quote:
Originally Posted by budge96
Ok so I just managed to obtain the 993 ABS tone rings .. Cobalt ( Anthony) mentioned he pressed the 964 ABS ring onto the 993 center washer did you do this as well or simply ran them as they (993) are ?
Wouldn’t that cause a code with different number of ABS tooths ? About to switch this out let me know please appreciate your experience thanks Bert
|
100% need to use the 964 teeth on the 993 center. Other option is to use C4 front outer CV - cutting off just behind the tone ring - essentially creating a threaded bolt and ABS ring all in one. The main benefit is really just being able to torque the hub nut without holding the bolt from the rear (tire is on the ground)..and this IS a help as I had to get help to hold the bolt head from the rear when assembling mine.
Really the best front hub you're going to get is 993 upright, hub and washer, with 964 abs ring.
Here, I changed the studs as well...also a good time to refresh the little clips, use 993 bolts and caged nut assemblies.
PS - timesert those caliper threads.