|
What's the outside wall diameter of the pipe you're trying to connect to? They make one designed for vitrified or clay tile that has a larger bell on one end but accepts 3 or 4 inch PVC on the other. I had to use one at my son's house because the ID of the tile would accept 4" but the OD was much larger due to the wall thickness of the pipe.
I'm not following why that won't work. If the ID is 3", you put it in the iron pipe then press the 2" down into that to create the seal the way it looks to me.
__________________
Nick
Last edited by cabmandone; 09-10-2025 at 11:09 AM..
|