Quote:
Originally Posted by EC900
Yeah, the blower look like an engine compartment auxiliary blowers for the heat exchangers. Good for cooler climates - not so much in FL.
Condenser is too beat up to trust the fins can be straightened up somewhat to do its job. Still would need pressure testing, aluminum corrosion and pin holes. Compressor might turn freely but if oil was drained, the seals could be compromised, also would need to be tested at an AC shop, could be a waste of money.
Worth saving - never a bad idea, save for the next guy to throw out - or for authenticity rebuild, some parts have a bit of value in that respect.
Worth using again - no. Big expense for a mediocre original system. Theres also the other missing components that go along with those used parts you don’t mention, either missing or in an equally bad state of nonuse.
|
yes this above ............
you can fix the fins on the condensor -there is a speial brush for that.....
No need the get rid of this stuf clean it fix it and somebody will want it one day--it is originals stuff no crap from China!!
Ivan