Quote:
Originally Posted by gmanelan
Wow this thread went in an interesting direction. I started out as a newbie just wanting to learn about the basics, but ended up learning about different alloys!
Those 95mm pistons for a 2.2 look interesting! In the end I went for the CP s 9:5 pistons in AA Birals to go with my DC 30 cam choice. Based on some previous posts I found I'm a little worried about the consistency of the bore but we will see.
If somebody could help me work out my dynamic CR I would appreciate it. Also any advice on ring clearance when using the 2618 alloy in birals.
Wish me luck and thanks for the help.
|
Static compression ratio of 9.5:1.
Effective stroke is 2.29 inches.
Your dynamic compression ratio is 8.49:1 .
Your dynamic cranking pressure is 172.95 PSI.