Quote:
Originally Posted by flyboy182
Yes I have the CIS test kit that is what allowed me to get my initial readings to indicate trouble with my WUR. I will try the water test approach. Top ports full of water and then pressure up one and thumb on the other. I will give it a go...
Thanks
Bill
|
Bill,
You misunderstood the test procedure for the fuel accumulator test. Get a glass of water and partially submerge the FA. You need half of the FA in water and upper half out of the water. Then blow air to one of the upper port and at the same time plug the outer upper port.
If the FA is good and you had blown enough air, there will be no air bubbles in the glass of water. If you see air bubbles, throw away the fuel accumulator. Repeat the test to confirm your test results.
Tony