[flyboy182]

Update: I adjusted the WUR using the "pound the pin" method...first pounding the pin back out as my cold pressure was way low. First attempt it was then too high so pounded the pin back in a bit and now I have CCP around 2.1bar...right at spec.

However my Warm CP is not rising high enough when I plug in the WUR and let me warm up. It stabilizes after about 4 minutes but gets only to about 2.7bar. Spec calls for 3.0 to 3.4...so somewhat low.

What does this suggest as a next step...get my CCP up a bit more to the high side of the cold range and maybe the WCP comes up enough into range?

Any thoughts here would be most appreciated. Thanks. Bill