|
I've put these cams in a 3.0 with 40 IDA Webers, 40mm ports, 1 3/4" headers, and 9.8/1 JE pistons. I was also very surprised by the low end torque, while still retaining the early-S type of top end pull. It pulled hard all the way to redline and wanted to keep going.
Also installed them in a 3.5 made from a 3.0 bottom end with 3.6 pistons and cylinders. (Please don't ask how this was accomplished. My head still hurts from all the complications.) This motor felt the same way, except even more so, due to the extra displacement.
It's good to hear that they work well with a smaller motor as well.
__________________
'69 911E coupe' RSR clone-in-progress (retired 911-Spec racer)
'72 911T Targa MFI 2.4E spec(Formerly "Scruffy")
2004 GT3
|