After backtracking for nearly three months to modify my cam housings, I'm almost back to where I was.
But this gave me some time to make my own top dead center tool. Cost $20, worked perfect...
I also had time to fabricate my own digital degree wheel. The rotary encoder was $50 and another $20 for the aluminum "fixturing"...
Used the TDC tool to find calculated TDC...
Set the DC43X-102 cams at 4.6mm lift at overlap for the 1-2-3 side...
I was able to hit 4.58mm lift at overlap for the 4-5-6 side...
Onward...