|
Platinum Member
Join Date: Jul 2001
Location: Leave the gun. Take the cannoli.
Posts: 21,389
|
2 wire, no ground, metal appliance..... no worries.
If you have a voltmeter, measure everything metal on that to ground with it plugged in and on.
If you have an ohmmeter, measure metal to both prongs, with it off and unplugged.
If you have neither, put some water in the sink, stick one foot in the sink, and touch everything metal on the fryer....
Edit: Perhaps that metal center area on the plug/socket is the ground? With it unplugged, measure continuity from that to the metal parts on the fryer.....
__________________
Political polls are often to give you an opinion, not to find out what your opinion is - Scott Adams
Last edited by dad911; 10-12-2025 at 12:19 PM..
|